Known for its brute strength and high payload capacity, steel is cut out for the toughest jobs. Our All-Steel bed is made of 3/16” steel tread plate and is mounted on our heavy duty steel subframe, giving you a truck bed that exceeds industry standards. Carolina Custom Products All Steel Bed goes through a 7-stage powder coating process to reduce the risk of corrosion and keep your bed looking new.
Heavy Duty Steel
Sub-Frame
At the heart of every bed is our Heavy-Duty Steel Sub-Frame, and with a 40,000 lbs. rating, we offer the strongest gooseneck cradle on the market. We also use an engineered, tested, and proven mounting system to ensure safety and provide the best weight disbursement throughout your truck chassis.
Aerodynamic Headache Rack
We implemented an aerodynamic tapered design to match the contour of your truck’s cab. This gives the added benefit of reduced wind resistance, better noise control, and greater fuel savings. Our headache racks are completely bolt on, allowing for simple and quick replacements.
Integrated Work Lights System
Our integrated work light system turns your four 6.5" x 2.25" LED back-up lights into work lights. Conveniently located in the headache rack, this auxiliary switch makes all the difference.
Sealed Wiring Harness with Water Resistant Plug In Play
We equip our beds with American-made wiring harnesses that are water tight and plug directly into your truck's factory harness without splicing. We use Dodge, Chevrolet, and Ford factory connectors on all standard beds, making installation simple and providing you with a deeper level of confidence you can depend on.
3/16" Steel Tread Plate
Using a thicker tread plate than our competitors gives us an advantage, and gives you a more durable and stronger truck bed. We took this extra step to ensure our beds could stand tough and heavy loads.
​
​
LED Lighting
Our reputation for quality is in every aspect of our beds, so when it comes to lighting, we use American-made 7-diode LED’s with Lumenx® lenses and circuitry. Our LED lights come with built-in reflectors that exceed the Federal Lighting Guide without the need for reflective stickers.
One OEM 7-way & 4-way Socket
Our high-quality single unit OEM 7-way & 4-way sockets are located on the rear bumper for your towing needs.
2-1/2" Receiver
The All-Steel’s 2-1/2" Receiver is rated at 18,000 pounds of towing capacity. This is tested though our Solid Edge simulation software, as well as at our testing grounds. All of our products are tested to ISO standards.
​
​
​
Internal Stake Pockets
Internal stake pockets give you the capability to easily add side boards. The internal design gives a sleek look to your bed. We pre-cut a hole in each stake pocket to allow for an anchor bolt to tighten your sideboards down to eliminate rattling. 56" CA and 60” CA models come with eight stake pockets, while 84” CA models come with ten.
Mud Flaps with Anti-Sail Brackets
Anti-sail brackets will keep your mud flaps straight and flat while your truck is in motion. We pre-drill our cross ribs and CNC laser cut and form mounts that make for simple and quick installation.
Sensor and Back-Up Camera installation
Installation of factory sensors and/or back up camera into your truck bed. Truck must come with sensors and/or back up camera.
Made in USA
“Made in the USA” speaks of quality, excellent craftsmanship and a superior product. At Carolina Custom Products, American made products are our first choice, down to the nuts and bolts.
Standard Features
Specs
56”CA SRW - Side View
Approximate Weight: 875 lbs
56"CA SRW - Top View
Under Body Tool Boxes with Dri-Dek® Liner
Contoured to your beds design, our toolboxes are engineered to reduce wind resistance, cut down fuel costs, and reduce noise. A unique spring-loaded T-handle latch makes opening and closing easier than ever.
60" CA Drivers Side
​
60" CA Passenger Side
​
84" CA Drivers Side
​
84" CA Passenger Side
​
Top Deck Toolboxes with Tailgate
Get extra storage with top deck tool boxes and tailgate package and keep your items away from the elements. Available in aluminum treadplate and black powder coat.
​
Note: This feature is not available for any 56" CA All-Steel beds.
60" CA Raw Aluminum
​
60" CA Black Powder Coat
​
84" CA Raw Aluminum
​
84" CA Black Powder Coat
​
8” Drop-In Side Rails with Tailgate
Made out of 3/16” aluminum tread plate, our drop in sides utilize your beds pre-existing internal stake pockets. Our tailgate has a contoured design that flows with the back of your bed, and provides a finished clean look.
60" CA Raw Aluminum
​
60" CA Black Powder Coat
​
84" CA Raw Aluminum
​
84" CA Black Powder Coat
​
6” Fold-Down Side Rails with Tailgate
Made out of 3/16” smooth aluminum, fold down sides add versatility when compared to standard drop in sides. This makes loading and unloading certain objects easier. Our tailgate has a contoured design that flows with the back of your bed. Our fold down sides are removable. Available in aluminum treadplate or black powder coat
60" CA Raw Aluminum
​
60" CA Black Powder Coat
​
84" CA Raw Aluminum
​
84" CA Black Powder Coat
​
Bolt-on Rub Rails
Our bolt-on rub rails are made out of 3/8 X 3” aluminum bar, and make securing items a breeze.
* Rub Rails are not compatible with fold down sides*
​
60” CA Raw Aluminum (6 rub rails)
​
60” CA Black Powder coat (6 rub rails)
​
84” CA Raw Aluminum (8 rub rails)
​
84” CA Black Powder Coat (8 rub rails)
​
D Rings
D-rings enable you to easily strap down loads. 60” CA models come with six
D-rings, while 84” CA models come with eight.
​
​
​
5th Wheel
This mini 5th wheel is designed to be mounted on top of the standard goose ball. Giving you the option to use either.
Features:
-
Rated at 40K
-
5 grease points
-
safety locking mechanism
-
ensures your 5th wheel is locked into the proper postilion ​
-
-
Billet forged steel that is machined for accuracy
Note: This feature is not available for any 56" CA All-Steel beds.
​
​
Gallery
Contact Us
We look forward to hearing from you!
(704) 592-5454
6424 Wilkesboro Hwy
Union Grove, NC 28689
© 2020 by Carolina Custom Products, INC.